ARK CLS Seismic Feature Enhancement V4.2
   Next

ARK CLS Seismic Feature Enhancement V4.2

ARK CLS Limited

Copyright © 2000 - 2016 ARK CLS Limited

All rights reserved. No part of this publication may be reproduced and/or published by print, or any other means without the written consent of ARK CLS Limited.

Table of Contents

1. Introduction
2. Brief Technical Overview
3. Quick Start
1. Launching SFE and Selecting Project
1.1. Launching SFE from OpenWorks environment (2003.12 or R5000)
1.2. Launching SFE from GeoFrame environment
2. Opening the Select Data dialog.
3. Opening the Aperture Design dialog.
3.1. Aperture Control tab
3.2. Parameters tab
4. Saving the project parameters
5. Start the SFE processing
4. Interfacing with the SFE Application
1. SFE Main Window
1.1. Menubar Area
1.1.1. File
1.1.2. Seismic
1.1.3. Process
1.1.4. Help
1.2. Toolbar Area
1.2.1. Tools Toolbar
1.3. Log Area
2. Select Data dialog
2.1. Select Volume dialog (2003.12)
2.2. Select Volume dialog (R5000)
2.3. Create Output Volume
3. Aperture Geometry Design
3.1. Aperture Control tab
3.1.1. Aperture Type
3.1.2. Traverse Aperture Size
3.1.3. True Scale
3.1.4. Additional Decimation
3.1.5. Output 3D Swath Width
3.2. Parameters tab
4. Seismic View
4.1. Toolbar
4.2. Seismic Display Area
A. Aperture Geometry

List of Figures

2.1. Showing digitized traverse though 3D survey
3.1. Seismic Feature Enhancement Main Window
3.2. Select a SeisWorks Project
3.3. Select a Project
3.4. Select Data Dialog
3.5. Aperture Geometry Design
4.1. SFE main window
4.2. Select Data Dialog
4.3. Select Volume (2003.12)
4.4. Select Volume (R5000)
4.5. Create New Seismic Volume. 2003.12 (L), R5000 (R)
4.6. Create New Seismic Volume - Advanced Volume Parameters (.3dv Tab). 2003.12 (L), R5000 (R)
4.7. Create New Seismic Volume - Advanced Volume Parameters (Bricked Tab). 2003.12 (L), R5000 (R)
4.8. Create New Seismic Volume - Advanced Volume Parameters (Compressed Tab). 2003.12 (L), R5000 (R)
4.9. Aperture Geometry Design
4.10. Aperture Geometry Design
4.11. Seismic view
A.1. Aperture Geometry for 3D SFE Traverse with Auto swath width off and Custom Width set to some value other than zero
   Next
   Chapter 1. Introduction